Introduction
The System Setup User Manual details the setting up and use of Tourplan NX setup applications - Code Setup, Security Setup.
Code Setup is where codes used by Tourplan are inserted so that they can be used in the various applications. Codes such as locations, service types are created in Code Setup and used throughout your system.
Within Code Setup there is an application called INI Settings, this application stores System Settings and controls the functions within Tourplan as well as providing organisations with the ability to label certain fields such as Analysis Field Labels or Address Field Labels.
Tourplan NX come pre-populated with many standard codes, for example common service types have been included; review of existing data is required in the setup stages of Tourplan.
The final application covered in this User Manual is Security Setup where Tourplan users are defined and security functions are available to limit users access to parts of the system.
NOTE: It is advised that all applications in this User Manual should eventually have high security settings placed on them to prevent unauthorised changes being made.
Many of the procedures covered in this User Manual are also covered in other User Manuals - for example, detail on setting up product locations is also covered in the Product User Manual.